Mustang Headers

Ford Mustang Headers

Hedman Hedders offers nearly 50 part numbers for use on Ford Mustangs and related models. Whether you are simply replacing the cast manifolds on your tired stock engine, or pulling the motor to replace it with a Higher performance crate motor, 351W... or even a Chevy LS, Hedman Hedders has a set of headers that will "FIT RIGHT IN"!

-Short, Mid-Length & Long
 Tube Header Designs!
-50 STATE LEGAL to HARDCORE
-Factory Setup or ENGINE SWAP
-Mild Steel or 304 STAINLESS STEEL
 Header Construction.
-RACE HEADERS Available!
-MADE IN USA Since 1954!

All Hedman Ford Mustang headers are made in the USA, and are covered by our limited lifetime warranty.

All models available in mild steel construction, and our most popular configurations are also available in 100% 304 Stainless Steel. Choose Between Standard Uncoated, HTC Polished Silver Ceramic, or Black Maxx Satin Black Ceramic Coated. All coatings are warrantied for a full Five Years.

***Unless otherwise stated in the information provided on this site, All HEDMAN HEDDERS are designed for use on stock cylinder heads. The use of aftermarket cylinder heads, or cylinder heads not original equipment on the listed vehicle, may result in component or chassis interference, as well as, sparkplug clearance. Always consult the head manufacturer before purchasing headers for use on AFTERMARKET or NON-STOCK heads, or contact the Hedman Tech Department at 562.921.0404 (8-4:30pm PST M-F).***


Dial in the right header for your Mustang by narrowing your results with the useful filters below.

61 – 80 of 95 products
FORD MUSTANG, COUGAR, MAVERICK; 1-5/8" LONG TUBE; 260-302W HTC COATED

FORD MUSTANG, COUGAR, MAVERICK; 1-5/8" LONG TUBE; 260-302W HTC COATED

1964-73 MUSTANG 260-302 (Factory 351W), FALCON, COUGAR, MAVERICK, RANCHERO, COMET, FAIRLANE, MONTEGO, TORINO; 260-302W; 1-5/8" LONG TUBE DESIGN; 3" BALL COLLECTOR- STANDARD-DUTY UNCOATED
Part#88306
FORD MUSTANG, COUGAR, MAVERICK; 1-5/8" LONG TUBE; 260-302W- ELITE HTC

FORD MUSTANG, COUGAR, MAVERICK; 1-5/8" LONG TUBE; 260-302W- ELITE HTC

1964-73 MUSTANG 260-302 (factory 351W), FALCON, COUGAR, MAVERICK, RANCHERO, COMET, FAIRLANE, MONTEGO, TORINO; 260-302W; 1-5/8" LONG TUBE DESIGN; 3" BALL COLLECTOR- ELITE MODEL WITH MATTE SILVER CERAMIC COATING
Part#88308
1970-73 Mustang/Cougar/Others 351C Headers; 1-5/8" FULL-LENGTH Tube- Uncoated

1970-73 Mustang/Cougar/Others 351C Headers; 1-5/8" FULL-LENGTH Tube- Uncoated

Long Tube Headers For 1970-73 Ford Mustang, Mercury Cougar / Cyclone / Montego, 1970 Ford Fairlane; 351C (Cleveland) Engine; 1-5/8" Diameter; 3" Ball/Socket Collector- Standard-Duty, Uncoated Mild Steel
Part#88320
Image Not
Available

1970-73 Mustang/Cougar/Others 351C Headers; 1-5/8" FULL-LENGTH Tube- BLACK MAXX

Long Tube Headers For 1970-73 Ford Mustang, Mercury Cougar / Cyclone / Montego, 1970 Ford Fairlane; 351C (Cleveland) Engine; 1-5/8" Diameter; 3" Ball/Socket Collector- Standard-Duty, BLACK-MAXX Satin Black Ceramic Coated Mild Steel
Part#88323
1970-73 Mustang/Cougar/Others 351C Headers; 1-5/8" FULL-LENGTH Tube- HTC

1970-73 Mustang/Cougar/Others 351C Headers; 1-5/8" FULL-LENGTH Tube- HTC

Long Tube Headers For 1970-73 Ford Mustang, Mercury Cougar / Cyclone / Montego, 1970 Ford Fairlane; 351C (Cleveland) Engine; 1-5/8" Diameter; 3" Ball/Socket Collector- Standard-Duty, HTC Polished Silver Ceramic Coated Mild Steel
Part#88326
Standard Uncoated Hedders; 1-1/2" Tube Dia; 3" Coll; FULL LENGTH Design

Standard Uncoated Hedders; 1-1/2" Tube Dia; 3" Coll; FULL LENGTH Design

Standard Uncoated Hedders; 1-1/2" Tube Dia.; 3" Coll.; FULL LENGTH Design
Part#88350
Image Not
Available

74-78 FORD MUSTANG II 302W- BLACK MAXX

74-78 FORD MUSTANG II 302W- BLACK MAXX
Part#88353
HTC Coated Hedders; 1-1/2" Tube Dia; 3" Coll; FULL LENGTH Design

HTC Coated Hedders; 1-1/2" Tube Dia; 3" Coll; FULL LENGTH Design

HTC Coated Hedders; 1-1/2" Tube Dia.; 3" Coll.; FULL LENGTH Design
Part#88356
Standard Uncoated Hedders; 1-1/2" Tube Dia; 3" Coll; FULL LENGTH Design

Standard Uncoated Hedders; 1-1/2" Tube Dia; 3" Coll; FULL LENGTH Design

Standard Uncoated Hedders; 1-1/2" Tube Dia.; 3" Coll.; FULL LENGTH Design
Part#88360
Image Not
Available

82-88 FORD T-BIRD 302- BLACK MAXX

82-88 FORD T-BIRD 302- BLACK MAXX
Part#88363
HTC Coated Hedders; 1-1/2" Tube Dia; 3" Coll; FULL LENGTH Design

HTC Coated Hedders; 1-1/2" Tube Dia; 3" Coll; FULL LENGTH Design

HTC Coated Hedders; 1-1/2" Tube Dia.; 3" Coll.; FULL LENGTH Design
Part#88366
Standard Uncoated Hedders; 1-1/2" Tube Dia; 2-1/2" Coll; MID-LENGTH Design

Standard Uncoated Hedders; 1-1/2" Tube Dia; 2-1/2" Coll; MID-LENGTH Design

Standard Uncoated Hedders; 1-1/2" Tube Dia.; 2-1/2" Coll.; MID-LENGTH Design
Part#88380
Image Not
Available

MUSTANG 79-85; 302/5.0L; MID-LENGTH- BLACK MAXX

MUSTANG 79-85; 302/5.0L; MID-LENGTH- BLACK MAXX
Part#88383
HTC Coated Headers; 1-1/2" Tube Dia; 2-1/2" Coll; MID-LENGTH Design

HTC Coated Headers; 1-1/2" Tube Dia; 2-1/2" Coll; MID-LENGTH Design

HTC Coated Headers; 1-1/2" Tube Dia.; 2-1/2" Coll.; MID-LENGTH Design
Part#88386
Standard Uncoated Hedders; 1-5/8" Tube Dia; 3" Coll; FULL LENGTH Design

Standard Uncoated Hedders; 1-5/8" Tube Dia; 3" Coll; FULL LENGTH Design

Standard Uncoated Hedders; 1-5/8" Tube Dia.; 3" Coll.; FULL LENGTH Design
Part#88390
Image Not
Available

79-93 MUSTANG FULL LGTH 1 5/8"- BLACK MAXX

79-93 MUSTANG FULL LGTH 1 5/8"- BLACK MAXX
Part#88393
HTC Coated Hedders; 1-5/8" Tube Dia; 3" Coll; FULL LENGTH Design

HTC Coated Hedders; 1-5/8" Tube Dia; 3" Coll; FULL LENGTH Design

HTC Coated Hedders; 1-5/8" Tube Dia.; 3" Coll.; FULL LENGTH Design
Part#88396
Standard Uncoated Hedders; 1-1/2" Tube Dia; 2-1/2" Coll; SHORTY Design

Standard Uncoated Hedders; 1-1/2" Tube Dia; 2-1/2" Coll; SHORTY Design

Standard Uncoated Hedders; 1-1/2" Tube Dia.; 2-1/2" Coll.; SHORTY Design
Part#88400
Image Not
Available

SHORTY FALCON,MUSTANG,FAIRLANE 260-302W- BLACK MAXX

SHORTY FALCON,MUSTANG,FAIRLANE 260-302W- BLACK MAXX
Part#88403
HTC Coated Hedders; 1-1/2" Tube Dia; 2-1/2" Coll; SHORTY Design

HTC Coated Hedders; 1-1/2" Tube Dia; 2-1/2" Coll; SHORTY Design

HTC Coated Hedders; 1-1/2" Tube Dia.; 2-1/2" Coll.; SHORTY Design
Part#88406
×