Mustang Headers

Ford Mustang Headers

Hedman Hedders offers nearly 50 part numbers for use on Ford Mustangs and related models. Whether you are simply replacing the cast manifolds on your tired stock engine, or pulling the motor to replace it with a Higher performance crate motor or 351W, Hedman Hedders has a set of headers that will "FIT RIGHT IN"!

-Short, Mid-Length & Long
 Tube Header Designs!
-50 STATE LEGAL to HARDCORE RACE
-Factory Setup or ENGINE SWAP
-Mild Steel or 304 STAINLESS STEEL
 Header Construction.
-RACE HEADERS Available!
-MADE IN USA Since 1954!

All Hedman Ford Mustang headers are made in the USA, and are covered by our limited lifetime warranty.

All models available in mild steel construction, and our most popular configurations are also available in 100% 304 Stainless Steel. Choose Between Standard Uncoated, HTC™ Polished Silver Ceramic, or Black-Maxx™ Satin Black Ceramic Coated. All coatings are warrantied for a full Five Years.

***Unless otherwise stated in the information provided on this site, All HEDMAN HEDDERS are designed for use on stock cylinder heads. The use of aftermarket cylinder heads, or cylinder heads not original equipment on the listed vehicle, may result in component or chassis interference, as well as, sparkplug clearance. Always consult the head manufacturer before purchasing headers for use on AFTERMARKET or NON-STOCK heads, or contact the Hedman Tech Department at 562.921.0404 (8-4:30pm PST M-F).***


Dial in the right header for your Mustang by narrowing your results with the useful filters below.

21 – 40 of 95 products
Image Not
Available

HD Black Long-Tube Engine Swap Headers to Install a 351W in 1964-73 Ford Mustang

1964-73 For Mustang, 351W Engine Swap Headers; 1-5/8 in. FULL-LENGTH Tube Design; 3 in. Collector; BLACK ELITE Heavy-Duty Model- Satin Black Ceramic Coated
Part#83668
Uncoated 1-3/4 in. Long Headers For '71-73 Mustang, Ranchero, Cougar 351C (2V)

Uncoated 1-3/4 in. Long Headers For '71-73 Mustang, Ranchero, Cougar 351C (2V)

Long Tube Headers For 1971-73 Ford Mustang or Mercury Cougar; 351C (Cleveland) Engine; Auto and Manual Transmission; 1-3/4 in. Diameter; 3 in. Ball/Socket Collector- Uncoated Mild Steel
Part#88220
Image Not
Available

Black 1-3/4 in. Long-Tube Headers For '71-73 Mustang, Ranchero, Cougar 351C (2V)

Long Tube Headers For 1971-73 Ford Mustang or Mercury Cougar; 351C (Cleveland) Engine; Auto and Manual Transmission; 1-3/4 in. Diameter; 3 in. Ball/Socket Collector- Black-Maxx Satin Black Ceramic Coated Mild Steel
Part#88223
Image Not
Available

Silver 1-3/4 in. Long-Tube Headers For 71-73 Mustang, Ranchero, Cougar 351C (2V)

Long Tube Headers For 1971-73 Ford Mustang or Mercury Cougar; 351C (Cleveland) Engine; Auto and Manual Transmission; 1-3/4 in. Diameter; 3 in. Ball/Socket Collector- HTC Polished Silver Ceramic Coated Mild Steel
Part#88226
Uncoated Factory-Fit 50-State Headers for 1999-04 Ford Mustang 3.8L V6 (w/EGR)

Uncoated Factory-Fit 50-State Headers for 1999-04 Ford Mustang 3.8L V6 (w/EGR)

Standard Uncoated Headers; 1-1/2 in. Tube Dia.; Stock Coll.; SHORTY Design
Part#88290
Image Not
Available
Silver Factory-Fit 50-State Headers for 1999-04 Ford Mustang 3.8L V6 (w/EGR)

Silver Factory-Fit 50-State Headers for 1999-04 Ford Mustang 3.8L V6 (w/EGR)

HTC Coated Headers; 1-1/2 in. Tube Dia.; Stock Coll.; SHORTY Design
Part#88296
Long-Tube Headers For 64-73 Mustang/Cougar & Others with Factory 260-351W

Long-Tube Headers For 64-73 Mustang/Cougar & Others with Factory 260-351W

1964-73 MUSTANG 260-302 (factory 351W); 1966-73 FALCON, COUGAR, MAVERICK, RANCHERO, COMET, FAIRLANE, MONTEGO, TORINO; 260-302W; 1-5/8 in. LONG TUBE DESIGN; 3 in. BALL COLLECTOR- STANDARD-DUTY UNCOATED
Part#88300
Image Not
Available

Black Long-Tube Headers For 64-73 Mustang/Cougar & Others with Factory 260-351W

HEDMAN HEDDERS 1964-73 MUSTANG 260-302 (factory 351W); 1966-73 FALCON, COUGAR, MAVERICK, RANCHERO, COMET, FAIRLANE, MONTEGO, TORINO; 260-302W; 1-5/8 in. LONG TUBE DESIGN; 3 in. BALL COLLECTOR- STANDARD-DUTY WITH BLACK MAXX CERAMIC COATING
Part#88303
Silver Long-Tube Headers For 64-73 Mustang/Cougar & Others with Factory 260-351W

Silver Long-Tube Headers For 64-73 Mustang/Cougar & Others with Factory 260-351W

HEDMAN HEDDERS 1964-73 MUSTANG 260-302 (factory 351W); 1966-73 FALCON, COUGAR, MAVERICK, RANCHERO, COMET, FAIRLANE, MONTEGO, TORINO; 260-302W; 1-5/8 in. LONG TUBE DESIGN; 3 in. BALL COLLECTOR- STANDARD-DUTY UNCOATED MILD STEEL
Part#88306
HD Silver Long-Tube Headers For 64-73 Mustang/Cougar & Others w/Factory 260-351W

HD Silver Long-Tube Headers For 64-73 Mustang/Cougar & Others w/Factory 260-351W

1964-73 MUSTANG 260-302 (factory 351W); 1966-73 FALCON, COUGAR, MAVERICK, RANCHERO, COMET, FAIRLANE, MONTEGO, TORINO; 260-302W; 1-5/8 in. LONG TUBE DESIGN; 3 in. BALL COLLECTOR- ELITE MODEL WITH MATTE SILVER CERAMIC COATING
Part#88308
Uncoated 1-5/8 in. Long Headers For '70-73 Mustang, Ranchero, Cougar 351C (2V)

Uncoated 1-5/8 in. Long Headers For '70-73 Mustang, Ranchero, Cougar 351C (2V)

Long Tube Headers For 1970-73 Ford Mustang, Mercury Cougar / Cyclone / Montego, 1970 Ford Fairlane; 351C (Cleveland) Engine; 1-5/8 in. Diameter; 3 in. Ball/Socket Collector- Standard-Duty, Uncoated Mild Steel
Part#88320
Image Not
Available

Black 1-5/8 in. Long-Tube Headers For '70-73 Mustang, Ranchero, Cougar 351C (2V)

Long Tube Headers For 1970-73 Ford Mustang, Mercury Cougar / Cyclone / Montego, 1970 Ford Fairlane; 351C (Cleveland) Engine; 1-5/8 in. Diameter; 3 in. Ball/Socket Collector- Standard-Duty, BLACK-MAXX Satin Black Ceramic Coated Mild Steel
Part#88323
Silver 1-5/8 in. Long-Tube Headers For 70-73 Mustang, Ranchero, Cougar 351C (2V)

Silver 1-5/8 in. Long-Tube Headers For 70-73 Mustang, Ranchero, Cougar 351C (2V)

Long Tube Headers For 1970-73 Ford Mustang, Mercury Cougar / Cyclone / Montego, 1970 Ford Fairlane; 351C (Cleveland) Engine; 1-5/8 in. Diameter; 3 in. Ball/Socket Collector- Standard-Duty, HTC Polished Silver Ceramic Coated Mild Steel
Part#88326
Uncoated 1-5/8 in. Long Tube Headers For 1974-78 Ford Mustang II with 302 V8

Uncoated 1-5/8 in. Long Tube Headers For 1974-78 Ford Mustang II with 302 V8

Standard Uncoated Headers; 1-1/2 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design
Part#88350
Image Not
Available
Silver 1-5/8 in. Long Tube Headers For 1974-78 Ford Mustang II with 302 V8

Silver 1-5/8 in. Long Tube Headers For 1974-78 Ford Mustang II with 302 V8

HTC Coated Headers; 1-1/2 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design
Part#88356
Uncoated 1-1/2 in. Long-Tube Headers for 79-93 Mustang & 82-88 Fox-Body 5.0L

Uncoated 1-1/2 in. Long-Tube Headers for 79-93 Mustang & 82-88 Fox-Body 5.0L

Standard Uncoated Headers; 1-1/2 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design
Part#88360
Image Not
Available
Silver 1-1/2 in. Long-Tube Headers for 79-93 Mustang & 82-88 Fox-Body with 5.0L

Silver 1-1/2 in. Long-Tube Headers for 79-93 Mustang & 82-88 Fox-Body with 5.0L

HTC Coated Headers; 1-1/2 in. Tube Dia.; 3 in. Coll.; FULL LENGTH Design
Part#88366
×