Camaro Headers

Chevy Camaro Headers

 IF YOU OWN A CHEVY CAMARO, HEDMAN HEDDERS HAS A SET OF ALL-AMERICAN HEADERS FOR YOU!

Hedman Hedders offers the largest selection of headers for use on Chevy Camaros and Firebirds. So, whether you are simply replacing the cast manifolds on your tired stock engine, or pulling it out to replace it with a Higher performance Big Block or New Era LS, Hedman Hedders has a set of headers that will "FIT RIGHT IN"!

-Short, Mid-Length & Long
 Tube Header Designs!
-50 STATE LEGAL to HARDCORE
-Factory Setup or ENGINE SWAP
-Mild Steel or 304 STAINLESS STEEL Header Construction.
-RACE HEADERS Available!
-MADE IN USA Since 1954!

All Hedman Camaro and Firebird headers are made in the USA, and are covered by our limited lifetime warranty.

All models available in mild steel construction, and our most popular configurations are also available in 100% 304 Stainless Steel. Choose Between Standard Uncoated, HTC Polished Silver Ceramic, or Black Maxx Satin Black Ceramic Coated. All coatings are warrantied for a full Five Years.

***Unless otherwise stated in the information provided on this site, All HEDMAN HEDDERS are designed for use on stock cylinder heads. The use of aftermarket cylinder heads, or cylinder heads not original equipment on the listed vehicle, may result in component or chassis interference, as well as, sparkplug clearance. Always consult the head manufacturer before purchasing headers for use on AFTERMARKET or NON-STOCK heads, or contact the Hedman Tech Department at 562.921.0404 (8-4:30pm PST M-F).***


Dial in the right header for your Camaro or Firebird by narrowing your results with the useful filters below.

121 – 140 of 144 products
Image Not
Available

BB. SHORTIE EARLY CAMARO/CHEVELLE- BLACK MAXX

BB. SHORTIE EARLY CAMARO/CHEVELLE- BLACK MAXX
Part#68613
HTC Coated Hedders; 1-3/4" Tube Dia; 3" Coll; Mid-Length Design

HTC Coated Hedders; 1-3/4" Tube Dia; 3" Coll; Mid-Length Design

HTC Coated Hedders; 1-3/4" Tube Dia.; 3" Coll.; Mid-Length Design
Part#68616
Standard Uncoated Hedders; 1-3/4" Tube Dia; 3" Coll; Mid-Length Design

Standard Uncoated Hedders; 1-3/4" Tube Dia; 3" Coll; Mid-Length Design

Standard Uncoated Hedders; 1-3/4" Tube Dia.; 3" Coll.; Mid-Length Design
Part#68617
ELITE Hedders; 1-3/4" Tube Dia; 3" Coll; Mid-Length Design

ELITE Hedders; 1-3/4" Tube Dia; 3" Coll; Mid-Length Design

ELITE Hedders; 1-3/4" Tube Dia.; 3" Coll.; Mid-Length Design
Part#68618
Standard Uncoated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design

Standard Uncoated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design

Standard Uncoated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design (for close ratio steering boxes)
Part#68620
Black MAXX Coated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design

Black MAXX Coated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design

Black MAXX Coated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design (for close ratio steering boxes)
Part#68623
HTC Coated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design

HTC Coated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design

HTC Coated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design (for close ratio steering boxes)
Part#68626
Standard Uncoated Hedders; 1-5/8" Tube Dia; 3" Coll; Mid-Length Design

Standard Uncoated Hedders; 1-5/8" Tube Dia; 3" Coll; Mid-Length Design

Standard Uncoated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design
Part#68640
Standard Uncoated Hedders; 1-5/8" Tube Dia; 3" Coll; Mid-Length Design

Standard Uncoated Hedders; 1-5/8" Tube Dia; 3" Coll; Mid-Length Design

Standard Uncoated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design
Part#68641
HTC Coated Hedders; 1-5/8" Tube Dia; 3" Coll; Mid-Length Design

HTC Coated Hedders; 1-5/8" Tube Dia; 3" Coll; Mid-Length Design

HTC Coated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design
Part#68646
ELITE Hedders; 1-5/8" Tube Dia; 3" Coll; Mid-Length Design

ELITE Hedders; 1-5/8" Tube Dia; 3" Coll; Mid-Length Design

ELITE Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design
Part#68648
Uncoated Headers; 1-5/8" Tube Dia; 3" Coll; Mid-Length (close ratio steering)

Uncoated Headers; 1-5/8" Tube Dia; 3" Coll; Mid-Length (close ratio steering)

Standard Uncoated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design (for close ratio steering boxes)
Part#68650
Image Not
Available

EARLY SB CAMARO, CHEVELLE MANUAL SHORTIES; CLOSE RATIO STEERING- BLACK MAXX

EARLY SB CAMARO, CHEVELLE MANUAL SHORTIES; CLOSE RATIO STEERING- BLACK MAXX
Part#68653
HTC Coated Headers; 1-5/8" Tube Dia; 3" Coll; Mid-Length (close ratio steering)

HTC Coated Headers; 1-5/8" Tube Dia; 3" Coll; Mid-Length (close ratio steering)

HTC Coated Hedders; 1-5/8" Tube Dia.; 3" Coll.; Mid-Length Design (for close ratio steering boxes)
Part#68656
Uncoated Headers; 1-5/8" Tube Dia; 3" Coll; FULL LENGTH (close ratio steering)

Uncoated Headers; 1-5/8" Tube Dia; 3" Coll; FULL LENGTH (close ratio steering)

Standard Uncoated Hedders; 1-5/8" Tube Dia.; 3" Coll.; FULL LENGTH Design (for "close ratio" steering boxes)
Part#68670
Image Not
Available

SB CAMARO,NOVA 67-81 1 5/8"; CLOSE RATIO STEERING- BLACK MAXX

SB CAMARO,NOVA 67-81 1 5/8"; CLOSE RATIO STEERING- BLACK MAXX
Part#68673
HTC Coated Headers; 1-5/8" Tube Dia; 3" Coll; FULL LENGTH (close ratio steering)

HTC Coated Headers; 1-5/8" Tube Dia; 3" Coll; FULL LENGTH (close ratio steering)

HTC Coated Hedders; 1-5/8" Tube Dia.; 3" Coll.; FULL LENGTH Design (for "close ratio" steering boxes)
Part#68676
ELITE Hedders; 1-3/4" Tube Dia; 3" Coll; Mid-Length Design

ELITE Hedders; 1-3/4" Tube Dia; 3" Coll; Mid-Length Design

ELITE Hedders; 1-3/4" Tube Dia.; 3" Coll.; Mid-Length Design
Part#68687
LS SWAP HEADERS; MID LENGTH; 67-69 CAMARO & 68-74 NOVA; UNCOATED

LS SWAP HEADERS; MID LENGTH; 67-69 CAMARO & 68-74 NOVA; UNCOATED

LS SWAP HEADERS; MID LENGTH; 67-69 CAMARO/FIREBIRD (F-BODY) & 68-74 NOVA/VENTURA (X-BODY); UNCOATED
Part#68710
LS SWAP HEADERS; MID LENGTH; 67-69 CAMARO & 68-74 NOVA; BLACK MAXX BLACK CERAMIC

LS SWAP HEADERS; MID LENGTH; 67-69 CAMARO & 68-74 NOVA; BLACK MAXX BLACK CERAMIC

LS SWAP HEADERS; MID LENGTH; 67-69 CAMARO/FIREBIRD (F-BODY) & 68-74 NOVA/VENTURA (X-BODY); BLACK MAXX BLACK CERAMIC COATED
Part#68713
×