0176-HAMUBURGERS PERFORMANCE LS OIL PAN & FILTER RELOCATION KIT LS Oil Pan into 82-04 Chevy S10, Blazer, Early model GM Cars & Trucks. Close-up of LS oil pan fittings with oil flow direction information.

LS Swap Oil Pan/Filter Reocation Kit; Single Filter; Horizontal Port, Red Pan

LS Engine Swap Oil Pan & Remote SINGLE Oil Filter Base Combo Kit; HORIZONTAL Port SINGLE Filter Base; RED Oil Pan (5qt.)


When performing an LS engine swap into classic muscle cars and trucks, the use of an aftermarket, steel oil pan usually provides better, cross member, component and ground clearance than GM's factory, cast... (Read More)

When performing an LS engine swap into classic muscle cars and trucks, the use of an aftermarket, steel oil pan usually provides better, cross member, component and ground clearance than GM's factory, cast aluminum pan. The only hurdle with this swap is that GM integrated the oil filter mounting flange and passage ways into the factory cast pan. Remove the factory LS pan, and you lose a place to spin-on your oil filter.

This LS swap specific oil pan and filter relocation system combo kit eliminates this hurdle by including both a rear sump oil pan that clears the vehicle's cross member, and a complete oil filter relocation system that allows you to relocate the oil filter from the factory LS pan to the firewall, fenderwell or other easy to reach location on the vehicle.

The compact, 5 qt., RED Painted pan in this kit has two integrated -10AN fittings that you attach the 90 degree hose fittings to, then plumb the oil lines to the remote mount, cast aluminum filter base. The kit includes a special oil pump pickup tube designed specifically for the oil pan, a complete oil pan gasket set and mounting bolts.

The remote base is a single filter unit that has horizontal inlet (2) and outlet (2) ports, and includes 30" hoses, 4 hose fittings, filter nipple and 2 plugs for the unused ports. The multiple port design allows the remote base to be hooked up with both hoses to the left, right, or one on each side. Just plug the unused ports with the pipe plugs included in this kit. The only thing not included is a PH8A, or equivalent, oil filter.

(Read Less)
Part#0176
$542.16

Product Specifications

(PLEASE REVIEW THE FOLLOWING PRODUCT SPECIFICATIONS & FOOTNOTES THOROUGHLY)

  • Baffled No
  • Capacity 5 Qts.
  • Color RED
  • Contents Pan, Pickup,Remote Filter Base, Oil Lines, Fittings, Nipple, Gaskets & Hardware
  • Depth 2" at front of Oil Pan; 6" at Rear Sump
  • Engine Chevy LS Series
  • Engine Notes 4.8L, 5.3L, 6.0L GM LS Series Engines
  • Filter Bypass Style Not Requied
  • Filter Nipple Thread Size 3/4"-16
  • Finish RED Painted
  • IMPORTANT! NOT FOR DIESEL, MARINE OR RACE USE!
  • Kit Type Oil Pan with Filter Relocation Kit
  • Length 7"
  • Oil Filter Compatibility PH8A or Equivalent (or equivalent)
  • Pan Capacity 5 Qts.
  • Pickup # 2522
  • Port Size -10AN
  • Material Steel
  • Remote Filter Base Style Single Filter; Horizontal Port
  • Remote Base Filter Size PH8A (or equivalent)
  • Sump Style WET
  • Vehicle Specific Listings LS engine into Early GM cars/trucks; 82-04 Chevy / GMC S10 / S15, Blazer / Jimmy
  • Width 8 1/4"
  • Bypass Mounting Style N o Bypass Adapter
  • Fitting Material Brass
  • Fitting Type Hose Barb
  • Fitting Quantity 4
  • Hose Connection Type Push Lock
  • Hose OD 0.75"
  • Hose Length 30"
  • Sump Location Rear
  • Kicked Out Yes
  • Oil Pan Depth (in) 6"
  • Crank Shaft Wiper Included No
  • Fastener(s) Included Yes
  • Filter Bypass (Included) No
  • Gasket Or Seal Included Yes
  • Hardware Included YES
  • Installation Hardware Included Yes
  • Nipple Included Yes
  • Oil Line Kit (Included) Yes
  • Oil Pan Bolts Included Yes
  • Pickup Included Yes
  • Plug Included Yes
  • Remote Base (Included) Yes
  • Windage Tray Included No
  • Dipstick Provision No
  • Drain Plug Thread Size 1/2"-20
  • Kickout Position Driver and passenger side
  • Oil Pan Capacity 5 Qt. Capacity
  • Oil Pan Finish Red Painted
  • Oil Pan Material Steel
  • Stroker Clearanced No
  • Construction Stamped/Fab
  • Engine Manufacturer Chevrolet
  • Engine Oil Cooler Return Fitting No
  • Fitting Thread -10AN
  • Hose ID 0.50"
  • Hose Material Synthetic Braid reinforced with Nitrile cover
  • Pressure Rating 300 PSI
  • Race Only No
  • Single or Dual Filter Single
  • Type Oil Pan with Remote Filter Kit
  • Replacement Gasket Set 4336
  • Replacement Nipple 1034
  • Replacement Oil Pan 1108
  • California Proposition 65 WARNING: Cancer & Reproductive Harm. For more info visit www.P65Warnings.ca.gov
  • Sump Dimensions 6" Deep, 8.25" Wide,7" Long
  • Replacement Filter Relocation Kit 1014
×