C10 Headers

C10 Headers

 

C10 / C20 CHEVY TRUCK HEADERS FROM THE WORLD'S LEADING HEADER MANUFACTURER!

Hedman Hedders has the largest selection of headers for the entire range of 1967-97 Chevy / GMC Trucks and SUVs. If you have a 1/2 or 3/4 ton pickup truck or Suburban, we manufacture a header to meet your specific needs. Choose from mid-length design models for maximum ground clearance and improved low-end performance, and full length designs that squeeze out the very last foot pound of torque when you run wide open throttle, or tow your toys to the river or woods. A variety of tube diameters are also available.

-Short, Mid-Length & Long
 Tube Header Designs!
-50 STATE LEGAL to HARDCORE
-Factory Setup or ENGINE SWAP
-Mild Steel or 304 STAINLESS STEEL
 Header Construction.
-RACE HEADERS Available!
-MADE IN USA Since 1954!

All Hedman C10 headers are made in the USA, and are covered by our limited lifetime warranty.

All models available in mild steel construction, and our most popular configurations are now available in 100% 304 Stainless Steel. Choose Between Standard Uncoated, HTC Polished Silver Ceramic, or Black Maxx Satin Black Ceramic Coated. All coatings are warrantied for a full Five Years.

***Unless otherwise stated in the information provided on this site, All HEDMAN HEDDERS are designed for use on stock cylinder heads. The use of aftermarket cylinder heads, or cylinder heads not original equipment on the listed vehicle, may result in component or chassis interference, as well as, sparkplug clearance. Always consult the head manufacturer before purchasing headers for use on AFTERMARKET or NON-STOCK heads, or contact the Hedman Tech Department at 562.921.0404 (8-4:30pm PST M-F).***

Dial in the right header for you Chevy Truck by narrowing your results with the useful filters below.

  1. Home
  2. Products
  3. HEADERS
  4. C10 Headers
1 – 20 of 87 products
SILVER E.O. HEADERS for '88-95 1/2-3/4 TON GM TRUCK/SUV; 5.0-5.7L With A.I.R.

SILVER E.O. HEADERS for '88-95 1/2-3/4 TON GM TRUCK/SUV; 5.0-5.7L With A.I.R.

 50-State Legal Headers For 88-95 CHEVY/GMC 2WD & 4WD 1/2-3/4 Ton Trucks, 92-95 1/2-3/4 Ton Suburban; 5.0-5.7L Engine With A.I.R. (Engine OFFSET to Passenger Side); 1-5/8 in. Long Tubes; 3 in. Ball Collector- Silver Coated Mild Steel
Part#61476
$1,122.57
RAW STAINLESS STEEL 1-5/8 IN. HEADERS, 67-87 C10-C30; SB CHEVY 283-400

RAW STAINLESS STEEL 1-5/8 IN. HEADERS, 67-87 C10-C30; SB CHEVY 283-400

 Mid-Length Headers For 1967-87 CHEVY/GMC 2WD (only) 1/2-1 Ton Pick-Up or, 1967-91 1/2-3/4 Ton Suburban with 283-400 SB Chevy Engine (Centered Engine Chassis Only); 1-5/8 in. Tubes; 3 in. Ball/Socket Collector- Raw T304 Stainless Steel
Part#62010
$1,038.25
BLACK, STAINLESS STEEL 1-5/8 IN. HEADERS, 67-87 C10-C30; SB CHEVY 283-400

BLACK, STAINLESS STEEL 1-5/8 IN. HEADERS, 67-87 C10-C30; SB CHEVY 283-400

 Mid-Length Headers For 1967-87 CHEVY/GMC 2WD (only) 1/2-1 Ton Pick-Up or, 1967-91 1/2-3/4 Ton Suburban with 283-400 SB Chevy Engine (Centered Engine Chassis Only); 1-5/8 in. Tubes; 3 in. Ball Collector- BLACK Coated, T304 Stainless Steel
Part#62013
$1,367.82
SILVER, STAINLESS STEEL 1-5/8 IN. HEADERS, 67-87 C10-C30; SB CHEVY 283-400

SILVER, STAINLESS STEEL 1-5/8 IN. HEADERS, 67-87 C10-C30; SB CHEVY 283-400

 Mid-Length Headers For 1967-87 CHEVY/GMC 2WD (only) 1/2-1 Ton Pick-Up or, 1967-91 1/2-3/4 Ton Suburban with 283-400 SB Chevy Engine (Centered Engine Chassis Only); 1-5/8 in. Tubes; 3 in. Ball Collector- SILVER Coated, T304 Stainless Steel
Part#62016
$1,339.05
STAINLESS LONG-TUBE HEADERS; 67-91 GM TRUCKS, MOTORHOMES; 283-400 NO A.I.R.

STAINLESS LONG-TUBE HEADERS; 67-91 GM TRUCKS, MOTORHOMES; 283-400 NO A.I.R.

 Stainless Long-Tube Headers; 67-91 CHEVY/GMC 1/2-1 Ton 2WD, 67-87 1/2-3/4 Ton 4WD Truck, 67-91 1/2-3/4 Ton SUV, 67-91 Motorhome; 283-400 SB Chevy No A.I.R. (Centered Engine Only); 1-5/8 in. Tubes; 3 in. Ball Collector- Uncoated
Part#62090
$1,530.02
BLACK STAINLESS LONG-TUBE HEADERS; 67-91 GM TRUCK, MOTORHOME; 283-400 NO A.I.R.

BLACK STAINLESS LONG-TUBE HEADERS; 67-91 GM TRUCK, MOTORHOME; 283-400 NO A.I.R.

 Stainless Long-Tube Headers; 67-91 CHEVY/GMC 1/2-1 Ton 2WD, 67-87 1/2-3/4 Ton 4WD Truck, 67-91 1/2-3/4 Ton SUV, 67-91 Motorhome; 283-400 SB Chevy No A.I.R. (Centered Engine Only); 1-5/8 in. Tubes; 3 in. Ball Collector- Black Ceramic-Coated
Part#62093
$1,624.14
SILVER STAINLESS LONG-TUBE HEADERS; 67-91 GM TRUCK, MOTORHOME; 283-400 NO A.I.R.

SILVER STAINLESS LONG-TUBE HEADERS; 67-91 GM TRUCK, MOTORHOME; 283-400 NO A.I.R.

 Stainless Long-Tube Headers; 67-91 CHEVY/GMC 1/2-1 Ton 2WD, 67-87 1/2-3/4 Ton 4WD Truck, 67-91 1/2-3/4 Ton SUV, 67-91 Motorhome; 283-400 SB Chevy No A.I.R. (Centered Engine Only); 1-5/8 in. Tubes; 3 in. Ball Collector- Silver Ceramic-Coated
Part#62096
$1,557.45
STAINLESS MID-LENGTH HEADERS FOR '67-91 GM 2WD TRUCKS/SUVS; LS ENGINE SWAP

STAINLESS MID-LENGTH HEADERS FOR '67-91 GM 2WD TRUCKS/SUVS; LS ENGINE SWAP

 T304 Stainless Steel Headers For Installing An LS Engine into 1967-87 CHEVY/GMC 1/2-3/4 Ton C10/C20 (2WD) Trucks, 67-91 Suburbans (2WD); 1-3/4 in. Diameter, Mid-Length Tube; 3 in. Ball & Socket Collector- Uncoated
Part#62740
$1,131.02
BLACK STAINLESS, MID-LENGTH HEADERS FOR '67-91 GM 2WD TRUCK/SUV; LS ENGINE SWAP

BLACK STAINLESS, MID-LENGTH HEADERS FOR '67-91 GM 2WD TRUCK/SUV; LS ENGINE SWAP

 T304 Stainless Steel Headers For Installing An LS Engine into 1967-87 CHEVY/GMC 1/2-3/4 Ton C10/C20 (2WD) Trucks, 67-91 Suburbans (2WD); 1-3/4 in. Diameter, Mid-Length Tube; 3 in. Ball & Socket Collector- Black Ceramic Coated
Part#62743
$1,543.80
SILVER STAINLESS, MID-LENGTH HEADERS FOR '67-91 GM 2WD TRUCK/SUV; LS ENGINE SWAP

SILVER STAINLESS, MID-LENGTH HEADERS FOR '67-91 GM 2WD TRUCK/SUV; LS ENGINE SWAP

 T304 Stainless Steel Headers For Installing An LS Engine into 1967-87 CHEVY/GMC 1/2-3/4 Ton C10/C20 (2WD) Trucks, 67-91 Suburbans (2WD); 1-3/4 in. Diameter, Mid-Length Tube; 3 in. Ball & Socket Collector- Silver Ceramic Coated
Part#62746
$1,504.47
STAINLESS 1-3/4 IN. LONG-TUBE HEADERS, 67-91 GM 2WD/4WD TRUCK, SUV; 396-502

STAINLESS 1-3/4 IN. LONG-TUBE HEADERS, 67-91 GM 2WD/4WD TRUCK, SUV; 396-502

 Stainless Long Tube Headers, 1967-91 CHEVY/GMC 1/2-1 Ton 2WD or 1/2-3/4 Ton 4WD Trucks, Blazer, 1/2-3/4 Ton 2WD SUV or 3/4 Ton 4WD SUV; 396-502 BB Chevy (Centered Engine Only); 1-3/4 in. Long Tubes; 3 in. Ball Collector- Uncoated
Part#62820
$1,368.59
BLACK STAINLESS 1-3/4 IN. LONG-TUBE HEADERS, 67-91 GM 2WD/4WD TRUCK/SUV; 396-502

BLACK STAINLESS 1-3/4 IN. LONG-TUBE HEADERS, 67-91 GM 2WD/4WD TRUCK/SUV; 396-502

 Stainless Long Tube Headers, 1967-91 CHEVY/GMC 1/2-1 Ton 2WD or 1/2-3/4 Ton 4WD Trucks, Blazer, 1/2-3/4 Ton 2WD SUV or 3/4 Ton 4WD SUV; 396-502 BB Chevy (Centered Engine Only); 1-3/4 in. Long Tubes; 3 in. Ball Collector- Black Coated
Part#62823
$1,639.10
SILVER STAINLESS 1-3/4 IN LONG-TUBE HEADERS, 67-91 GM 2WD/4WD TRUCK/SUV; 396-502

SILVER STAINLESS 1-3/4 IN LONG-TUBE HEADERS, 67-91 GM 2WD/4WD TRUCK/SUV; 396-502

 Stainless Long Tube Headers, 1967-91 CHEVY/GMC 1/2-1 Ton 2WD or 1/2-3/4 Ton 4WD Trucks, Blazer, 1/2-3/4 Ton 2WD SUV or 3/4 Ton 4WD SUV; 396-502 BB Chevy (Centered Engine Only); 1-3/4 in. Long Tubes; 3 in. Ball Collector- Silver Coated
Part#62826
$1,615.76
BLACK 1-3/4IN. LONG-TUBE HEADERS; 67-91 GM TRUCKS, MOTORHOMES; 283-400 NO A.I.R.

BLACK 1-3/4IN. LONG-TUBE HEADERS; 67-91 GM TRUCKS, MOTORHOMES; 283-400 NO A.I.R.

 HD Long-Tube Headers; 67-91 CHEVY/GMC 1/2-1 Ton 2WD, 67-87 1/2-3/4 Ton 4WD Truck, 67-91 1/2-3/4 Ton SUV, 67-91 Motorhome; 283-400 SB Chevy No A.I.R. (Centered Engine Only); 1-3/4 in. Tubes; 3 in. Ball Collector- Black, Mild-Steel
Part#63088
$1,103.82
HD BLACK LONG-TUBE HEADERS; 67-91 GM TRUCK, MOTORHOME; 283-400 WITH A.I.R.

HD BLACK LONG-TUBE HEADERS; 67-91 GM TRUCK, MOTORHOME; 283-400 WITH A.I.R.

 Standard Long-Tube Headers; 67-87 CHEVY/GMC 1/2-1 Ton 2WD or 1/2-3/4 Ton 4WD Truck, 67-91 1/2-3/4 Ton SUV, 67-91 Motorhome; 283-400 SB Chevy No A.I.R. (Centered Engine Only); 1-5/8 in. Tubes; 3 in. Ball Collector- Black, Mild-Steel
Part#63091
$1,099.09
Image Not
Available

BLACK LONG-TUBE CLUTCH HEADERS; 67-91 GM TRUCK, MOTORHOME; 283-400 NO A.I.R.

 Standard Clutch Cross Shaft Headers; 67-91 CHEVY/GMC 1/2-1 Ton 2WD, 67-87 1/2-3/4 Ton 4WD Truck, 67-91 1/2-3/4 Ton SUV, Blazer; 283-400 SB Chevy No A.I.R. (Centered Engine Only); 1-5/8 in. Tubes; 3 in. Ball Collector- Black, Mild-Steel
Part#63092
$913.44
Image Not
Available

BLACK 1-5/8IN. LONG-TUBE HEADERS; 67-91 GM TRUCKS, MOTORHOMES; 283-400 NO A.I.R.

 Standard Long-Tube Headers; 67-91 CHEVY/GMC 1/2-1 Ton 2WD, 67-87 1/2-3/4 Ton 4WD Truck, 67-91 1/2-3/4 Ton SUV, 67-91 Motorhome; 283-400 SB Chevy No A.I.R. (Centered Engine Only); 1-5/8 in. Tubes; 3 in. Ball Collector- Black, Mild-Steel
Part#63093
$913.44
BLACK LONG-TUBE D-PORT HEADERS FOR 67-91 GM TRUCKS, BLAZER, JIMMY; 283-400

BLACK LONG-TUBE D-PORT HEADERS FOR 67-91 GM TRUCKS, BLAZER, JIMMY; 283-400

 Long-Tube D-Port Headers For 1967-97 CHEVY/GMC 2WD & 4WD, 1/2-1 Ton Pick-Ups & SUVs; 283-400 SB Chevy (Centered Engine Chassis Only); 1-5/8 in. Long Tubes; 3 in. Ball/Socket Collector- Black-Maxx Satin Black Ceramic-Coated Mild Steel
Part#63099
$1,057.28
Image Not
Available

STANDARD BLACK HEADERS, 1967-91 GM 2WD/4WD TRUCKS, SUVS; 396-502 WITH A.I.R.

 Standard 50-State Headers; 67-91 CHEVY/GMC 3/4-1 Ton 2WD, 1/2-3/4 Ton 4WD Truck, Blazer, 1/2-3/4 Ton 2WD SUV or 3/4 Ton 4WD SUV; 396-502 BB Chevy with A.I.R. (Centered Engine); 1-3/4 in. Tubes; 3 in. Ball Collector- Black-Coated Mild Steel
Part#63111
$1,037.69
Image Not
Available

STANDARD BLACK HEADERS, 1967-91 GM 2WD/4WD TRUCKS, SUVS; 396-502 NO A.I.R.

 Standard Headers; 67-86 CHEVY/GMC 3/4-1 Ton 2WD, 1/2-3/4 Ton 4WD Trucks, Blazer; 68-91 1/2-3/4 Ton 2WD, 3/4 Ton 4WD Suburban; 396-502 BB Chevy without A.I.R (Centered Engine); 1-3/4 in. Tube; 3 in. Ball Collector- Black-Coated Mild-Steel
Part#63117
$1,002.73
×