CAR LS Swap Headers

***Unless otherwise stated in the information provided on this site, All HEDMAN HEDDERS are designed for use on stock cylinder heads. The use of aftermarket cylinder heads, or cylinder heads not original equipment on the listed vehicle, may result in component or chassis interference, as well as, sparkplug clearance. Always consult the head manufacturer before purchasing headers for use on AFTERMARKET or NON-STOCK heads, or contact the Hedman Tech Department at 562.921.0404 (8-4:30pm PST M-F).***


Dial in the right header for your vehicle by narrowing your results with the useful filters below.

41 – 60 of 267 products
Image Not
Available

LS IN 78-81 A-BODY/82-88 G-BODY HEADERS; 1 7/8 X 2 IN. DIA, LONG TUBE-BLACK MAXX

Headers For Installing An LS Engine into 1978-81 GM GM A-Body/82-88 G-Body Cars; 1-7/8 in. x 2 in. Diameter, Stepped Long Tube; 3 in. Slip-on Collector- Black-Maxx Satin Black Ceramic Coated, Mild Steel Construction
Part#45043
Image Not
Available

LS IN 78-81 A-BODY/82-88 G-BODY HEADERS;1 7/8 X 2 IN. DIA, STEPPED LONG TUBE-HTC

Headers For Installing An LS Engine into 1978-81 GM GM A-Body/82-88 G-Body Cars; 1-7/8 in. x 2 in. Diameter, Stepped Long Tube; 3 in. Slip-on Collector- HTC Polished-Silver Ceramic Coated, Mild Steel Construction
Part#45046
LS INTO 1978-81 A-BODY/82-88 G-BODY HEADERS; 2 IN. DIA., LONG TUBE-UNCOATED

LS INTO 1978-81 A-BODY/82-88 G-BODY HEADERS; 2 IN. DIA., LONG TUBE-UNCOATED

Headers For Installing An LS Engine into 1978-81 GM GM A-Body/82-88 G-Body Cars; 2 in. Diameter, Long Tube; 3 in. Slip-on Collector- Uncoated, Mild Steel Construction
Part#45050
LS INTO 1978-81 A-BODY/82-88 G-BODY HEADERS; 2 IN. DIA., LONG TUBE; BLACK MAXX

LS INTO 1978-81 A-BODY/82-88 G-BODY HEADERS; 2 IN. DIA., LONG TUBE; BLACK MAXX

Headers For Installing An LS Engine into 1978-81 GM GM A-Body/82-88 G-Body Cars; 2 in. Diameter, Long Tube; 3 in. Slip-on Collector- Black-Maxx Satin Black Ceramic Coated, Mild Steel Construction
Part#45053
LS INTO 1978-81 A-BODY/82-88 G-BODY HEADERS; 2 IN. DIA., LONG TUBE; HTC (SILVER)

LS INTO 1978-81 A-BODY/82-88 G-BODY HEADERS; 2 IN. DIA., LONG TUBE; HTC (SILVER)

Headers For Installing An LS Engine into 1978-81 GM GM A-Body/82-88 G-Body Cars; 2 in. Diameter, Long Tube; 3 in. Slip-on Collector- HTC Polished-Silver Ceramic Coated, Mild Steel Construction
Part#45056
Image Not
Available

LS INTO 1967-69 F-BODY (GEN 1) HEADERS; 1 3/4 IN. DIA, LONG TUBE-UNCOATED

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-3/4 in. Diameter, Long Tube; 3 in. Weld-on Collector- Uncoated, Mild Steel Construction
Part#45070
Image Not
Available

LS INTO 1967-69 F-BODY (GEN 1) HEADERS; 1 3/4 IN. DIA, LONG TUBE; BLACK MAXX

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-3/4 in. Diameter, Long Tube; 3 in. Weld-on Collector- Black-Maxx Satin Black Ceramic Coated, Mild Steel Construction
Part#45073
Image Not
Available

LS IN 1967-69 F-BODY (GEN 1) HEADERS; 1 3/4 IN. DIA, LONG TUBES-HTC

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-3/4 in. Diameter, Long Tube; 3 in. Weld-on Collector- HTC Polished-Silver Ceramic Coated, Mild Steel Construction
Part#45076
LS IN 67-69 F-BODY (GEN 1) HEADERS; 1-3/4 X 1-7/8 IN. DIA, STEPPED LONG-UNCOATED

LS IN 67-69 F-BODY (GEN 1) HEADERS; 1-3/4 X 1-7/8 IN. DIA, STEPPED LONG-UNCOATED

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-3/4 in. x 1-7/8 in. Diameter, Stepped Long Tube; 3 in. Weld-on Collector- Uncoated, Mild Steel Construction
Part#45080
Image Not
Available

LS IN 67-69 F-BODY (GEN 1) HEADERS; 1-3/4 X 1-7/8 IN. DIA, STEPPED LONG

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-3/4 in. x 1-7/8 in. Diameter, Stepped Long Tube; 3 in. Weld-on Collector- Black-Maxx Satin Black Ceramic Coated, Mild Steel Construction
Part#45083
Image Not
Available

LS IN 67-69 F-BODY (GEN 1) HEADERS; 1-3/4 X 1-7/8 IN. DIA, STEPPED LONG TUBE-HTC

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-3/4 in. x 1-7/8 in. Diameter, Stepped Long Tube; 3 in. Weld-on Collector- HTC Polished-Silver Ceramic Coated, Mild Steel Construction
Part#45086
LS INTO 1967-69 F-BODY (GEN 1) HEADERS; 1 7/8 IN. DIA, LONG TUBE-UNCOATED

LS INTO 1967-69 F-BODY (GEN 1) HEADERS; 1 7/8 IN. DIA, LONG TUBE-UNCOATED

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-7/8 in. Diameter, Long Tube; 3 in. Weld-on Collector- Uncoated, Mild Steel Construction
Part#45090
LS INTO 1967-69 F-BODY (GEN 1) HEADERS; 1 7/8 IN. DIA, LONG TUBE; BLACK MAXX

LS INTO 1967-69 F-BODY (GEN 1) HEADERS; 1 7/8 IN. DIA, LONG TUBE; BLACK MAXX

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-7/8 in. Diameter, Long Tube; 3 in. Weld-on Collector- Black-Maxx Satin Black Ceramic Coated, Mild Steel Construction
Part#45093
LS IN 1967-69 F-BODY (GEN 1) HEADERS; 1 7/8 IN. DIA, LONG TUBES-HTC

LS IN 1967-69 F-BODY (GEN 1) HEADERS; 1 7/8 IN. DIA, LONG TUBES-HTC

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-7/8 in. Diameter, Long Tube; 3 in. Weld-on Collector- HTC Polished-Silver Ceramic Coated, Mild Steel Construction
Part#45096
Image Not
Available

LS INTO 1967-69 F-BODY (GEN 1) HEADERS; 1 7/8 IN. DIA, LONG TUBE-STAINLESS

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-7/8 in. Diameter, Long Tube; 3 in. Weld-on Collector- T304 Stainless Steel
Part#45097
Image Not
Available

LS IN 67-69 F-BODY (GEN 1) HEADERS; 1-7/8 X 2 IN. DIA, STEPPED LONG TUBE

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-7/8 in. x 2 in. Diameter, Stepped Long Tube; 3 in. Weld-on Collector- Uncoated, Mild Steel Construction
Part#45100
Image Not
Available

LS IN 67-69 F-BODY (GEN 1) HEADERS; 1-7/8 X 2 IN. DIA, STEPPED LONG-BLACK MAXX

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-7/8 in. x 2 in. Diameter, Stepped Long Tube; 3 in. Weld-on Collector- Black-Maxx Satin Black Ceramic Coated, Mild Steel Construction
Part#45103
Image Not
Available

LS IN 67-69 F-BODY (GEN 1) HEADERS; 1-7/8 X 2 IN. DIA, STEPPED LONG TUBE-HTC

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 1-7/8 in. x 2 in. Diameter, Stepped Long Tube; 3 in. Weld-on Collector- HTC Polished-Silver Ceramic Coated, Mild Steel Construction
Part#45106
LS INTO 1967-69 F-BODY (GEN 1) HEADERS; 2 IN. DIA, LONG TUBE-UNCOATED

LS INTO 1967-69 F-BODY (GEN 1) HEADERS; 2 IN. DIA, LONG TUBE-UNCOATED

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 2 in. Diameter, Long Tube; 3 in. Weld-on Collector- Uncoated, Mild Steel Construction
Part#45110
Image Not
Available

LS INTO 1967-69 F-BODY (GEN 1) HEADERS; 2 IN. DIA, LONG TUBE; BLACK MAXX

Headers For Installing An LS Engine into 1967-69 Camaro / Firebird (Gen 1 F-Body); 2 in. Diameter, Long Tube; 3 in. Weld-on Collector- Black-Maxx Satin Black Ceramic Coated, Mild Steel Construction
Part#45113
×