These uncoated, standard-duty headers use TORK-STEP stepped tube technology to provide performance superior to any standard tube header design. Originally designed for racing applications, Hedman is the first manufacturer to mass produce this technology for the street.

All Hedman street Hedders are MADE IN THE USA, and are backed by a lifetime warranty against manufacturing defects! HTC coated stainless models also available.

UNLESS SPECIFICALLY STATED, ALL HEADERS ARE DESIGNED FOR USE WITH FACTORY PROFILE CYLINDER HEADS!
If your engine does not have factory cylinder heads, we strongly recommend you contact the aftermarket head manufacturer to confirm that the deck angle, exhaust port height and spark plug angle/position match the factory cylinder head design, before ordering your headers. If you are still unsure, please contact the Hedman Tech lines M-F 8am-4:30PM (Pacific) @ (562) 921-0404.

FINDING ALL THE IMPORTANT INFO:
If you have not already done so, please enter your vehicle's year/make/model into the drop-down windows below and click the green SEARCH button. (we do not recommend displaying ALL items, as this may take a while to load)

-GENERAL PRODUCT INFO: click the blue SHOW DETAILS
Button at the bottom of your part #s section.

-VEHICLE SPECIFIC INFO: click the RED PLUS next to your vehicle's
year/make/model range to display a list of vehicles. Next, select your vehicle's
listing to display important information for that specific vehicle.

 
Part # ApplicationTube DiameterTube StyleEngineFinishKEY FEATUREMaterial Media
88690
 
Ford Mustang 1996 to 2004

Liter: 4.6

Photo Installation Instructions
$421.93

Tork-Step Hedders, manufactured exclusively
by Hedman Hedders, evacuate exhaust gasses from the combustion chambers faster than, and more efficiently than, stock manifolds or a standard tube hedder. The increase in available exhaust chamber volume allows for more fresh air/fuel mixture to be drawn in, creating a purer fuel charge packed with more power. The result is the tug you feel on the “seat of your pants” when you punch the accelerator...better known as TORQUE.

Once used only on race engines, Hedman Hedders was the first major manufacturer to incorporate this state of the art technology into hedders you can affordably install on your favorite musclecar.

This is a standard-duty hedder manufactured using 18 gauge tubes, 1/4 flanges, and uncoated.
 

Hedman's Tork-StepTM Hedders are backed by a lifetime warranty against manfufacturing defects.

The hedder on the left is shown with Hedman's optional HTC Ceramic-metallic coating, but the hedders in this section are shipped black, and without this coating

Proud to Say, Made in U.S.A.!, since 1954.

 
http://hedman.com/images/ePIM/original/88690.jpg